Bakery Technical Briefs
SmartBake Ignition Module
SmartBake Ignition Module
After years of providing the ISPU-2 DSI ignition module, Banner-Day has released the ISPU-3 DSI ignition module after extensive research and testing. With customer support always in mind, current and future, the ISPU-3 DSI ignition module is a replacement and upgrade to the ISPU-2.
The ISPU-3 provides superior performance and reliability over the ISPU-2 which you have come to trust for your burner DSI control.
- Expect superior performance with the ISPU-3
- Available in “local” and “remote” sense configurations
- Use of Class C, Type 3B Ignition Cable enhances performance and reliability.
- Form and dimensions slightly different than the ISPU-2. Note differences when planning upgrades
SmartBake Ignition Module ISPU-3
Description:
The SmartBake® ISPU-3 solid-state ignition module provides a high voltage spark to ignite a direct-fired ribbon burner and then monitor the flame utilizing rectification technology. Features of the SmartBake® ISPU-3 module include:
- Burner Ignition and Flame Monitoring
- Controls Burner Solenoid Gas Valve(s)
- 10 Second Trial for Ignition
- Diagnostic Monitoring LED
- High Voltage Ignition Connector
- Detachable Wiring Harness
- Use Class C, Type 3B Suppression Cable (Sold separately and pre-made)
- Available with Mounting Plate
Read More: SmartBake® Ignition Module ISPU-3® Ignition Module ISPU-3
SmartBake Ignition Module S6E Open
Description:
The SmartBake® S6E solid-state ignition module provides a high voltage spark to ignite direct-fired ribbon burners and then monitors the flame utilizing flame rectification technology. Features of the SmartBake® S6E modules include:
- Burner Ignition and Flame Monitoring
- Controls Burner Solenoid Gas Valve(s)
- 10 sec. Trial for Ignition
- On / Reset / Test switch
- Dual Color LED Indicates “Burner ON” (GREEN) / “Burner Flame Failure” (RED)
- Integral ISPU-3 Assembly with Detachable Wiring Connector & Diagnostic Monitoring LED
- Terminal Strip with Finger Safe Compression Plate Terminals
- High Voltage Ignition Connector
- 24V Maintenance Test Port; Enables Local Burner Control Testing
- Use Class C, Type 3B Suppression Ignition Cable (Sold Separately & Pre-made)
- Integral Mounting Plate
Read More: SmartBake® Ignition Module S6E Open Style® Ignition Module S6E Open Style
SmartBake Ignition Module S6E Enclosed
Description:
The SmartBake® S6E solid-state ignition module provides a high voltage spark to ignite direct-fired ribbon burners and then monitors the flame utilizing flame rectification technology. Features of the SmartBake S6Emodules include:
- Burner Ignition and Flame Monitoring
- Controls Burner Solenoid Gas Valve(s)
- 10 sec. Trial for Ignition
- On / Off / Test switch
- Dual Color LED Indicates “Burner On” (GREEN) / “Burner Flame Failure” (RED)
- Integral ISPU-3 Assembly with Detachable Wiring Connector & Diagnostic Monitoring LED
- Terminal Strip with Finger Safe, Box Lug Connections
- High Voltage Ignition Connector
- Burner/Ignitor Ground Connector
- Remote Sensor Connector (remote sense model only)
- 24V AC Maintenance Test Port; Enables Local Burner Control and Testing
- Use Class C, Type 3B Suppression Ignition Cable (Sold Separately & Pre-made)
- Dust Protection